I will design a custom enclosure or chassis for your pcb, robotics, or hardware project

Yes, absolutely — this is the most common starting point. Send me the PCB dimensions (length × width × height), connector positions, and any mounting hole locations. A datasheet, photo next to a ruler, or manufacturer drawing all work. I model the PCB envelope myself and build enclosure around it.

Both — every enclosure I design is a complete assembly: base + lid, with whatever closure method you specify (screws into bosses, snap fits, or friction fit). For sheet metal, I also deliver the flat-cut DXF for each panel separately so you can send them straight to a laser cutter.

Yes — I make robot chassis. Share your motor specs, wheel dimensions, electronics layout, and any structural constraints. I design for the manufacturing method you'll use and include motor mount geometry and board mounting provisions.

I design in Fusion 360 and deliver STEP as the universal handoff format — it opens in SolidWorks, CATIA, Inventor, Onshape, and every other major CAD tool with full solid geometry intact. If you need the native Fusion 360 .f3d file to continue editing parametrically, that's included in every tier.

Yes absolutely. Share your logo as an SVG or DXF file and I'll apply it as an emboss or deboss. For injection-molded parts I'll also advise on minimum feature depth for the molding process.

Yes. IP-rated designs require gasket channels, specific surface flatness, and appropriate fastener spacing — all of which I incorporate at the design stage. You'll need to source compatible gasket material (I'll specify the cross-section and durometer), but the geometry will be correct.

Yes, Unlimited revisions are offered on this gig for limited time. Order soon!