Browse categories
Explore
Fiverr Pro
English
$
USD
I will create verified kicad footprints and 3d models for your pcb design
KiCad footprints PCB review and Home Assistant configs
I am a home theater and smart home enthusiast with over 18 years of experience in hardware and software development. I have held leadership roles in product management, project management, and softwar...
About this Gig
You need a part in KiCad that isn't in the default libs - or is in a community lib and you're not sure the pads match the real package.
I build footprints from the vendor mechanical drawing, not from "looks like a QFN-16" vibes. I used to ship product decisions at Alarm.com (emPower); now I also pull cable through Bright Wire Solutions and design my own ESP32-S3 boards. Wrong pad pitch shows up when the boards come back and the module won't seat.
What you get: footprint measured against the vendor drawing (pads, pin-1, courtyard, posts, EPAD); a short provenance note in the footprint (drawing revision and what I checked); import-tested in current KiCad; one revision if it doesn't drop cleanly into your project.
What I need: manufacturer part number, datasheet if you have it (otherwise I pull it), KiCad version, any pin-naming rules.
What I won't do: invent a footprint when no authoritative drawing exists (I'll tell you before you pay); silently reuse a scraped EasyEDA/SnapEDA part and call it verified.
Your DRC validates the board against the footprint. Nothing validates the footprint against the part. That's the gap.
Specialization:
Schematics
•
Footprint
File format:
STEP
•
VRML
•
SCH
•
Software:
Fusion 360
•
KiCad
Interface:
UART
•
USB
•
SPI
•
I2C
•
Ethernet
My Portfolio
Other Electronics Engineering Services I Offer
FAQ
What do you need from me?
The manufacturer part number, plus the datasheet or mechanical drawing if you have it (otherwise I'll locate it). If no authoritative drawing exists for your part, I'll tell you before you order - I never invent a footprint from a similar-looking part.
Can you do connectors and unusual packages?
Yes - connectors are the parts that most need this treatment: locating posts, shrouds, mating direction and reach are exactly what auto-generators get wrong. Fine-pitch ICs, QFN/DFN with exposed pads, modules and castellated parts are all in scope.
Do you use AI tools?
Yes, openly: I run an AI-assisted workflow for measurement extraction and cross-checking, and I personally verify every dimension against the vendor drawing before delivery. The provenance note in each file records exactly what was checked and against which drawing revision.
I need a whole library of parts - do you do bulk?
Yes. Message me with your part list and I'll send a custom offer - the per-part price drops with quantity, and multi-part libraries are delivered as one organized KiCad library folder.
Which KiCad versions and file formats are supported?
Please tell me the KiCad version you use when you order; I’ll prepare the footprint for that version and confirm the file format needed.
