Browse categories
Explore
Fiverr Pro
English
$
USD
I will configure your auracast or bluetooth le audio firmware
Wireless Audio Engineer, IoT Systems Integrator
Wireless Audio Engineer | IoT Systems Integrator (Bluetooth LE)
I am a high-fidelity audio engineer and hardware systems specialist with over 5 years of experience in technical architecture and media...
About this Gig
Is your Auracast or LE Audio implementation failing?
You have the hardware (Nordic nRF5340, Ezurio AW-100), but the firmware isn't syncing. The Sink modules won't connect. The latency is too high.
I am a Systems Integrator specializing in Bluetooth LE Audio. I bridge the gap between the manufacturer's datasheet and your working product.
What I can do for you:
- Firmware Configuration: Debugging AT Command scripts and compile errors.
- Sink/Source Sync: Fixing connection drops and "Error 120" sync issues.
- Optimization: Tuning for low latency (<60ms) and stable stereo broadcast.
Hardware I support:
- Ezurio (Laird) AW-100 / BL5340 Series
- Nordic Semiconductor nRF Connect SDK
Stop guessing with the code. Let's get your hardware working.
Please message me with your hardware model before ordering.
Platform:
Other
Sensors:
Microphone
•
Sound & vibration
Expertise:
Firmware development
•
Debugging
•
IoT
FAQ
What specific hardware do you support?
I specialize in the Nordic Semiconductor nRF5340 SoC and Ezurio (Laird) AW-100/BL5340 modules. If you are using a different chipset, please message me first to ensure compatibility.
Do you provide the physical hardware/chips?
No. I provide the Firmware, Configuration Scripts, and Deployment Guides. You must have the hardware physically present at your location to test and deploy the code I deliver.
Can you configure multiple receivers (Sinks) for one transmitter?
Yes. This is the core benefit of Auracast. I can configure your Source (Transmitter) to broadcast to unlimited Sinks (Receivers) simultaneously with synchronized audio.
Why is the Basic Package just a consultation?
Embedded systems are complex. Before I write code, I need to verify your hardware schematics and project goals to ensure the solution is viable. This saves you money in the long run.
