I will create kicad symbols, footprints and 3d models with a datasheet proof
About this Gig
A wrong footprint costs you a board. I build KiCad parts from the manufacturer's land pattern and prove it.
What you get per part:
- Schematic symbol with the correct pinout, following the KiCad Library Convention (KLC)
- Footprint from the manufacturer's recommended land pattern (IPC-7351 when the datasheet gives none), including thermal pads, vias and paste
- 3D model: KiCad's standard model, your STEP file, or a simple body built from the package drawing
- PROOF file: every pad dimension with the datasheet page it comes from, plus what was not specified
Every part is checked automatically (pad dimensions against the drawing, pins against the datasheet, KLC) and then by a second, independent review before I deliver.
Format: KiCad 10 and KiCad 9 (both included, each opened and checked in that version): .kicad_sym, .pretty, STEP.
Please send the exact ordering part numbers and a datasheet link or PDF. If a manufacturer download is behind a login, send me the PDF.
I use AI-assisted tools and check every delivery myself. If your NDA does not allow AI tools, please contact me before ordering.
Specialization:
Footprint
File format:
STEP
•
Other
Software:
KiCad
Interface:
UART
•
USB
•
SPI
•
I2C
•
Controller Area Network (CAN)
My Portfolio
FAQ
Which KiCad versions do I get?
Both KiCad 10 and KiCad 9. The KiCad 9 copy is opened, re-saved and compared pad by pad in KiCad 9 before delivery. KiCad 8 and older are not supported.
Where do the dimensions come from?
From the manufacturer's recommended land pattern in the datasheet; if none is given, from IPC-7351 and the package drawing. The PROOF file names the datasheet page for every dimension.
Do I get a 3D model for every part?
Yes: KiCad's model of the same body, your STEP file, or a simple model built from the package drawing. Manufacturer STEP files you did not send are linked, not included (licence).
Which parts are out of scope?
Parts above the pin limit of the package, BGAs above 100 balls, and parts without a public or supplied dimensioned drawing. Message me first and I will send a custom offer.
Do you use AI?
Yes. AI-assisted tools do most of the build, then automatic checks and a second independent review, and I check every delivery myself. If your NDA forbids AI tools, please do not order.
What if a footprint is wrong?
Send me the dimension and the datasheet page. I fix it within the revisions; the PROOF file shows where each value came from, so it is quick to check.

