I will color slice split paint 3d model stl to 3mf multicolor bambu lab 3d print ready

I primarily work with STL files, but I can also accept OBJ and existing 3MF files that need recoloring or re-slicing. If you're unsure whether your file will work, just send it over and I'll check it before you order.

I can configure your file for the Bambu Lab X1 Carbon, X1E, P1S, P1P, A1, and A1 Mini. Just let me know which printer you own when you place your order so I can select the correct machine profile in Bambu Studio.

Absolutely. If you have preferences for layer height, infill pattern, wall count, or print speed, just include them in your order requirements. If you're not sure, I'll choose the best settings for your model type and intended use.

Before I start coloring I always run a mesh repair and STL file fix for Bambu Studio compatibility. Minor issues like small holes, non-manifold edges, or inverted normal I fix at little charge. If the model has severe geometry problems that would require full reconstruction, I'll notify you asap

Yes, as long as the model's license allows for personal use STL modification and multicolor remixing, I can color any model you've legally downloaded. Just share the file or the download link with me. If the model is licensed for personal use only, the colored 3MF I deliver is for your own printing

I'll deliver your print-ready 3MF Bambu Studio project file download directly through the Fiverr order page. Along with the file I include screenshot previews of the colored and sliced model so you can visually confirm everything looks right before you print.

Bambu Studio's multicolor tools are powerful but have a steep learning curve — especially getting the AMS purge settings, wipe tower, and color transitions for clean multicolor FDM prints dialed in correctly. Most new Bambu owners waste significant time and filament on failed first attempts.