I will provide vibration analysis for rotating machinery

No. The analysis is advice only. Your technical team retains the responsibility for the plant machinery. However, the analysis is based on international standards and best practices. In addition, the final report is detailed enough and provides evidence for the subsequent advice.

Almost all machinery driven by induction motors; pumps, fans, compressors (not enclosed in bottles), purifiers (separators), and medium size turbochargers. An analysis is also provided for variable frequency drive (VFD) motors. Plants can be small factories but also boats.

Certainly. In fact, my initial training and more than half of my experience was in the maritime industry.

The brand of the sensor is your choice. Although I possess a number of commercial analysis software, I prefer the measurements to be provided in a non-proprietary format. Time waveforms in *.wav or *.dat files and frequency spectra in *.dat or *.csv files, provided from sensors as an option.

There are techniques to clear measurement errors. However, some corrupted measurements can only be discarded. The request for them to be repeated can be communicated during the revision. Naturally, the first-ever survey can be "adventurous", but future surveys can be flawless.

Both frequency spectrum and time waveform can provide valuable information, but at least one is necessary. Measuring points, directions, and a lot of useful information are presented at: https://sites.google.com/datahermeneutics.com/vibrationanalysis/home.