Browse categories
Explore
Fiverr Pro
English
$
USD
I will design hybrid inverter, pv optimizer, and solar tracker pcb
About this Gig
Gig Description:
Is your hybrid inverter or solar tracker board overheating, noisy, or failing under load? Most failures come from bad layout, not bad parts.
I design hybrid inverter, PV optimizer, and solar tracker boards with tight switching loops, clean current sense routing, heavy copper, proper isolation, and low inductance gate drive paths, so they run cool, stay stable, and perform for years in hot, dusty field conditions.
WHAT YOU WILL GET
- Manufacturing ready PCB layout
- Gerber, drill, BOM and pick and place files
- Power stage layout for inverter, MPPT and DC DC stages
- Gate driver layout with tight half bridge and full bridge loops
- Motor driver layout for solar trackers
- Protection for PV surge, reverse polarity and short circuit
- Support for 12V, 24V, 48V and high voltage DC bus
- Thermal and high current review
WHY WORK WITH ME
- Hands on experience with hybrid inverter and solar boards
- Low noise layouts with high efficiency
- Proper creepage and clearance for safety
- Designs checked for easy fabrication
- Fast replies and clear communication
READY TO START?
Send me your voltage, current, and board needs, and message me before ordering. Let us build your solar board today.
FAQ
What files will I receive at delivery?
You get manufacturing ready files including Gerber, drill, BOM and pick and place files, so you can send them straight to any PCB fabrication house.
What voltages can you design for?
I design for 12V, 24V and 48V systems as well as high voltage DC bus boards. Send me your PV input, battery or bus voltage and current, and I will confirm the design approach before we start.
Can you design the gate driver and power stage for a hybrid inverter?
Yes. I lay out half bridge and full bridge stages with tight, low inductance gate drive loops so your inverter switches cleanly and stays stable under load.
Do you design boards for solar trackers with motor drivers?
Yes. I lay out motor driver stages for solar trackers with proper current handling, protection and noise control, so the board works reliably outdoors.
Should I message you before placing an order?
Yes, please. A quick message with your voltage, current and board needs helps me recommend the right package and give you an accurate delivery time.
