I will integrate and troubleshoot modbus, can, ethercat, and other industrial protocols

Struggling with communication drops, packet errors, or complex register mapping?

I provide professional fieldbus and industrial networking integration to connect PLCs, sensors, VFDs, and edge gateways seamlessly. Whether you are building a new automated system or troubleshooting a factory floor network, I deliver robust, production-ready communication pipelines.

Protocols & Networks I Support:

• Modbus: RTU (RS485/RS232), TCP/IP, ASCII
• CAN Networks: CANbus, CANopen, SAE J1939, DeviceNet
• EtherCAT: Master/Slave setup, ESI XML files, Distributed Clocks (DC)
• Industrial Ethernet: PROFINET, EtherNet/IP, Raw TCP/UDP Sockets
• Legacy & IIoT: PROFIBUS, IO-Link, AS-i, OPC UA, MQTT

What I Can Do For You:

• Map I/O holding registers, coils, and CANopen/EtherCAT PDOs/SDOs.
• Troubleshoot packet loss, CRC errors, node ID conflicts, and bus termination.
• Configure protocol converters and network gateways (e.g., Modbus-to-EtherCAT or PROFINET bridges).
• Write communication logic for Siemens, Beckhoff, Rockwell, and Codesys PLCs, or custom drivers in Python/C/C++.
• Integrate external load cells, temperature transmitters, and motor drives.

Please message me before ordering to discuss your hardware!