Browse categories
Explore
Fiverr Pro
English
$
USD
I will design 3d printable pcb enclosure or electronic product casing, esp32 pcb design
Deji
4.0
4.0
About this gig
Most PCB enclosures on Fiverr look like boxes.
Yours won't.
A poorly designed enclosure cracks under stress, traps heat, misaligns ports, and makes your product look unprofessional even if your PCB is perfect. I design enclosures that are built around your board, not the other way around.
️ ENCLOSURE TYPES I COVER:
- Custom PCB enclosures (ESP32, Arduino, Raspberry Pi, custom layouts)
- IoT device housings and smart product casings
- Waterproof / IP-rated sealed enclosures
- Snap-fit & screw-fit closures
- Injection moulding-ready designs (draft angles, parting lines, ejector pins)
- 3D printing optimized files (zero-support where possible)
- Sheet metal designs
- PCB case with ports, vents, display cutouts, antenna slots
WHAT MAKES THIS DIFFERENT:
I design PCBs too meaning I understand exactly how electronics behave inside a housing. Thermal management, EMI shielding gaps, connector clearances I think about all of it so you don't have to.
DELIVERABLES INCLUDE:
SolidWorks source files
STEP / IGES files
STL (print-ready)
PDF technical drawings
Photorealistic render images
Don't let a bad enclosure hold back a great product. Message me with your PCB details and I'll send you a quote today.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Deji
Deji
Mechatronics Engineering Expert
- FromNigeria
- Member sinceMay 2026
- Avg. response time1 hour
- Last delivery2 weeks
Languages
English, Polish, Russian, German
Hi, I’m Engineer Deji, a Certified Mechatronics Engineer with 4+ years of hands-on experience delivering high-performance electronic, robotics and sensors-related cases solutions. I specialize in PCB design, embedded systems, power electronics, IoT systems, and MATLAB/Simulink modeling.
I manage projects from concept to production-ready design, including schematics, PCB layout, firmware, and system optimization. I work with Altium, KiCad, Proteus, ETAP, Python, and C/C++. I deliver reliable, efficient solutions built to perform in real-world conditions.
My Portfolio
Other Industrial & Product Design Services I Offer
FAQ
Do I need to send you my PCB files before ordering?
Yes — at minimum I need your PCB dimensions and a list of components that need external access (ports, buttons, LEDs, etc.). You don't need to share schematics or Gerber files unless you want me to verify clearances directly.
Can you design an enclosure if I only have rough sketches or a reference photo?
Absolutely. A dimensioned sketch, photo with measurements, or even a competitor product you want to reference is enough to get started. The more detail you share, the closer the first draft will be to your vision.
What if my PCB is an irregular shape — not rectangular?
No problem. I work with custom board outlines. Just upload your board file (KiCad, Eagle, Gerber, or DXF) and I'll model the enclosure around your exact shape.
Will the STL files be ready to print without modification?
Yes. All STL files are checked for manifold geometry, wall thickness, and printability before delivery. I optimise for minimal supports where possible.
What's the difference between snap-fit and screw-fit — which one should I choose?
Snap-fit is faster to open and close, better for prototypes or low-access devices. Screw-fit is more secure and better for outdoor or industrial use. Not sure? Message me with your use case and I'll recommend.
Can you make the enclosure waterproof?
Yes. I design IP44, IP65, and IP67 rated enclosures with gasket channels and sealed port designs. Specify your required IP rating in the order requirements.
I need both PCB design and enclosure... can you do both?
Yes, I offer full PCB design on separate gigs. Message me before ordering and I'll give you a bundled quote that covers everything end to end.
Do you offer revisions if the fit isn't perfect?
Yes, all packages include revisions. If the enclosure doesn't fit your board after you've 3D printed it, send me the measurements of what needs adjusting and I'll fix it.
Reviews
1 reviews for this Gig
| (0) | ||
| (1) | ||
| (0) | ||
| (0) | ||
| (0) |
Rating Breakdown
- Seller communication level
- Quality of delivery
- Value of delivery
Sort By
Most relevant
T thegreatarm
United States
Very good to work with and delivered a good product.
$400-$600
Price
3 weeks
Duration
F 
Seller's Response
Helpful?
Reviews
1 reviews for this Gig
| (0) | ||
| (1) | ||
| (0) | ||
| (0) | ||
| (0) |
Rating Breakdown
- Seller communication level
- Quality of delivery
- Value of delivery
Sort By
Most relevant
T thegreatarm
United States
Very good to work with and delivered a good product.
$400-$600
Price
3 weeks
Duration
F Seller's Response
Helpful?
