I will write a self checking verilog testbench and review your fpga rtl
About this Gig
Your FPGA design compiles, but does it actually work? I find the bugs and prove the fix with a self-checking Verilog/SystemVerilog testbench you can rerun.
I'm an FPGA/RTL engineer with 5+ years on Xilinx/AMD devices (Artix-7, Virtex-7, Zynq-7000, Zynq UltraScale+). I led a six-engineer RTL team before going independent.
WHAT YOU GET
- RTL review (Verilog or VHDL): handshakes, resets, clock-domain crossings and state machines. Written findings ranked by severity, each pointing to the line of RTL.
- Self-checking testbench: reference model, random stalls, reset tests and a clear PASS/FAIL.
- Regression flow: Makefile/Tcl for Vivado batch, Verilator, GHDL or NVC, so your team runs one command.
- Common blocks: AXI4-Stream, AXI-Lite, SPI, I2C, UART, SRAM/Flash controllers, DSP pipelines.
HOW I WORK
- Scope and deliverables agreed in writing before I start.
- I report what was simulated, what was only synthesized and what was tested on hardware, and keep them separate.
- If I don't have a tool or board, I say so up front.
TOOLS: Vivado, Vitis, ISE, Quartus, ModelSim/QuestaSim, Verilator, GHDL, NVC, Yosys, ILA.
Message me your RTL and target device before ordering.
Platform:
FPGA
Expertise:
Debugging
•
Testing
FAQ
Do you test on a real FPGA board?
Only if we agree it up front and I have access to the board. Otherwise I report what was simulated and what was only synthesized, and I state clearly that hardware testing was not done.
Which languages and tools do you support?
Review in Verilog, SystemVerilog or VHDL. Testbenches in Verilog/SystemVerilog. Vivado, Quartus, ModelSim/QuestaSim, Verilator, GHDL, NVC. Xilinx/AMD devices are my main focus.
What do I need to send you?
Your RTL files, the target device and tool version, a short description of the intended behavior, and any failing waveform or log. A block diagram or spec helps.
Will the testbench run in my simulator?
I write it for the simulator you name (Vivado XSIM, QuestaSim, Verilator) and tell you which version I ran it on.
Review vs testbench: what is the difference?
A review is a written list of findings from reading your RTL. A testbench runs your design in simulation and shows PASS/FAIL. The Standard and Premium packages include both.
Can you fix the bugs you find?
The packages deliver findings and tests, not rewrites. If you want me to fix the RTL, message me for a custom offer.
My design is bigger than the package limits.
Send me the file sizes before ordering. Larger designs get a custom offer so the price matches the work.
