I will do cfd analysis at low costs
Mechanical Engineer Engineering Tutor ThermalFluid CFD Specialist
About this Gig
I will perform professional 2D or 3D CFD simulations for fluid-flow and heat-transfer problems using ANSYS Fluent and/or OpenFOAM.
Depending on your project, the analysis may include:
Internal or external flow
Laminar or turbulent flow
Steady-state or transient simulation
Pressure drop, velocity, temperature and heat-flux evaluation
Forced or natural convection and conjugate heat transfer
Aerodynamic forces and performance coefficients
Mesh-quality checks and convergence monitoring
You will receive case files, clear contour plots, key engineering results and a concise technical report explaining the geometry, mesh, boundary conditions, physical models, solver settings and conclusions.
Before ordering, please contact me with your geometry, fluid and material properties, operating conditions, required outputs and deadline. I will review the scope and recommend a suitable 2D or 3D model and package. Complex geometries, multiphase flow, combustion, compressible flow, moving meshes and extensive parametric studies require a custom offer.
Accurate inputs are essential: CFD results depend on the assumptions, boundary conditions and available validation data.
My Portfolio
FAQ
What information do you need before starting?
Please provide the geometry or CAD file, dimensions, fluid and material properties, boundary and operating conditions, required results, reference data and delivery deadline.
Should I choose a 2D or 3D simulation?
A 2D model is suitable when the geometry and flow can be represented accurately in two dimensions. A 3D model is required when three-dimensional effects significantly influence the results. I will review your project and recommend the appropriate approach.
Which CFD software do you use?
I use ANSYS Fluent and OpenFOAM. The software will be selected according to the physics, geometry, required deliverables and your preferences.
What will I receive?
Depending on the selected package, you will receive contour plots, key numerical results, convergence information, case files and a technical report describing the setup, assumptions, models and conclusions.
How do you assess the reliability of the results?
I review mesh quality, residual convergence, monitored quantities and relevant mass or energy balances. When suitable reference or experimental data are available, the results can also be compared with them.
What does a revision include?
A revision covers reasonable corrections within the originally agreed scope. A new geometry, operating condition, physical model or additional simulation case may require an extra service or custom offer.

