I will l design poe power over ethernet pcb embedded devices
About this Gig
Need a specialized engineer to design a custom Power over Ethernet (PoE) circuit board? You are in the right place. I deliver production-ready, highly optimized PCB designs engineered specifically for your network-powered tracking, security, or computing systems.
I offer master-level layout implementation for:
IEEE 802.3af/at/bt PoE standards (Type 1 through Type 4, up to 90W+)
Flyback and forward isolated DC-DC converter topologies
Gigabit Ethernet signal routing and differential pair impedance matching
Surge protection, TVS diode arrays, and robust EMI/EMC filtering shielding
Low-power embedded microcontrollers (ESP32, STM32) integrated alongside network paths
What you receive at completion:
️ Complete Schematic Capture & verified Bill of Materials (BOM)
️ Factory-ready Gerber, NC Drill, and Pick-and-Place data archives
️ 3D STEP models to test inside your custom metal or plastic enclosure
Please reach out with your block diagram or project feature list before ordering so we can align on power requirements!
FAQ
Do you design isolated or non-isolated PoE power supplies?
I highly recommend and specialize in isolated topologies (using flyback or forward transformers) to ensure your embedded microcontroller is safely protected from electrical faults and line surges on the Ethernet network.
Can your designs pass strict EMI and EMC compliance testing?
Yes. I implement robust input filtering, common-mode chokes, transient voltage suppressors, and proper ground plane stitching to keep electromagnetic interference as low as possible, paving the way for smooth CE/FCC testing.
What happens if my board requires high power consumption, like a PoE++ application?
I am deeply familiar with the modern IEEE 802.3bt standard. For high-wattage hardware (up to 90W), I design with thicker copper weights, wider power traces, and optimized thermal vias to manage heat safely.
