Browse categories
Explore
Fiverr Pro
English
$
USD
I will do pcb design and layout for iot and embedded boards cm4 cm5 carrier board
Professional pcb design engineer
Hi, I’m Grace, a PCB design engineer with 5 years of experience turning ideas into manufacturable, reliable boards. I specialize in schematic capture, PCB layout, and design review for IoT, embedded, ...
About this Gig
Need a CM4 or CM5 carrier board that works on the first spin? I design production-ready PCBs for the Raspberry Pi Compute Module 4 and 5, plus IoT and embedded hardware, from schematic to fab-ready files.
WHAT YOU GET
- Complete schematic around your CM4/CM5
- 2 to 6 layer PCB layout with clean routing and solid grounding
- Gerber, drill, BOM and pick-and-place files
- PDF schematic and STEP 3D model for enclosure fit
- DRC-checked design built to your manufacturers capabilities
- INTERFACES I INTEGRATE
- USB, Ethernet, HDMI, PCIe/M.2, MIPI DSI/CSI, CAN, UART, SPI, I2C, SDIO, Wi-Fi, BLE
WHY WORK WITH ME
- Careful power design, decoupling and signal integrity
- Verified footprints, including Hirose DF40 module connectors
- Clear communication and on-time delivery
- Design notes included so you can build on the work
SOFTWARE
KiCad, Altium Designer, Eagle, EasyEDA
Message me before ordering with your required interfaces, board size and layer count, and Ill recommend the right package.
Lets build your board right the first time.
Specialization:
Circuit design
•
Schematics
•
Layout
•
Gerber
File format:
Gerber
•
STEP
•
VRML
•
BRD
•
Interface:
HDMI
•
MIPI DSI/CSI
•
I2S
•
UART
•
USB
•
SPI
•
I2C
•
SDIO
•
PCIe
•
Ethernet
FAQ
Which Compute Modules do you design carrier boards for?
CM4 and CM5, including Lite, eMMC, and wireless variants. I design around the Hirose DF40 connectors and the module pinout from the official Raspberry Pi datasheets.
What do I need to send before you start?
A list of required interfaces and connectors, board size or enclosure limits, preferred layer count, and your target manufacturer. A sketch or existing schematic helps, but a clear feature list is enough.
Can you work from my existing schematic?
Yes. I can review it, fix issues, and build the layout from it. If you only have an idea or a feature list, I can draw the schematic first.
Which interfaces can you include?
USB, Ethernet, HDMI, PCIe/M.2, MIPI DSI/CSI, CAN, UART, SPI, I2C, SDIO, and Wi-Fi/BLE antenna routing. Tell me what you need before ordering so I can confirm it fits your package.
What files will I receive?
Gerber and drill files, PDF schematic, BOM, pick-and-place file, and a STEP 3D model. Higher packages also include the source project files. Exact contents are listed in each package.
