I will make technical drawing and 2d cad drafting in solidworks

A drawing is only useful if the shop can build from it and an inspector can verify it. I write drawings that pass both tests.

I work as a CMM programmer and quality control technician. I inspect parts against drawings every day, which means I know exactly which datums, tolerances and callouts cause problems on the shop floor - because I am the one who finds them.

HOW IT WORKS

1. You send me your 3D model, sketch or existing drawing, and tell me what the part has to do.

2. I define the datum scheme first, around how the part will actually be held and measured.

3. I dimension every feature and apply GD&T to ISO 1101 where it matters.

4. General tolerances are stated per ISO 2768, never left to assumption.

5. You receive a PDF for reading, plus DWG and DXF you can edit and send to a supplier.

WHY THIS MATTERS

Most drawings fail quietly. A tolerance is unmeasurable, so the inspector approximates it, so the part ships, so it fails in the field. I build the datum structure first so that never happens.

WANT TO TALK FIRST?

For anything complex, I am happy to have a short call before you order. It saves both of us time.

WHAT I NEED FROM YOU

A 3D model in STEP, IGES or SLDPRT, or a leg