I will 3d print in 16k and handpaint your 3d models

All models except tiny ones will be printed hollow where possible and will contain small drainholes for resin to flush out of the model, to ensure no uncured resin stays inside the model. Drain holes can be filled when you receive the model, using some Tack or a tiny amonut of grey plaster.

You must provide your own .STL or .CTB files, pre-bought or from a free website. I will ONLY print legal prints and cannot print anything under Non Commercial Licenses or if the print violates terms and services on the site where they are bought. It is YOUR responsibility to provide legal files.

If you provide me with an un-pre-supported model, expect a tiny time-bump as i will place supports manually in the print software.

Please let me know if you have any wishes regarding colors, since the default print color will be grey if nothing is decided beforehand. Expect delays if i have to get a hold of a color not in my own stock.

Prints can sometimes fail due to a bad model being provided. I will keep you updated if this happens. Delivery time might go up, depending on the severity of the failed print.