I will design custom pcb antennas for iot, esp32, and lorawan

Design custom pcb antennas for iot, esp32, and lorawan

If your IoT device is dropping connections or barely reaching across the room, it is usually a poorly tuned antenna. You can have the best code in the world, but if the RF path is messy, the hardware fails. I help you fix that by designing custom PCB antennas that actually work for your specific enclosure and board constraints.

Most people just copy a reference design and wonder why it fails. I look at your board size, battery placement, and plastic casing because all of these shift the frequency. I focus on making sure your ESP32 has solid Wi-Fi and your LoRaWAN nodes actually hit the range they are supposed to.

Service Included:

• Custom PCB antenna trace design
• RF simulation and matching network
• Impedance control for 50 Ohm paths
• Gerber files and manufacturing data
• Testing and tuning recommendations
• Assistance with component selection

How it works:

1. You send your board layout and casing specs

2. I simulate and design the antenna structure

3. Final delivery of updated Gerber and CAD files

Send over your board file and let's get your signal sorted.