Browse categories
Explore
Fiverr Pro
English
$
USD
I will pcb trace restoration micro reverse engineering soldering automotive pcb repair
pcb design
My name is John, a professional PCB designer helping businesses transform concepts into reliable and production-ready electronic products. am pcb engineer
About this Gig
I provide professional PCB trace repair, micro soldering, board-level restoration, and reverse engineering for automotive ECUs, industrial controllers, consumer electronics, and custom boards. Using microscope-level precision, conductive silver epoxy, fine copper wire jumpers, and UV solder mask restoration, I bring damaged boards back to full functionality cleanly, reliably, and permanently.
What I Offer:
- PCB Trace Repair & Restoration
- Automotive ECU PCB Repair
- Micro Soldering SMD & Fine Pitch
- Lifted & Torn Pad Restoration
- PCB Reverse Engineering Schematic from Board
- Water & Corrosion Damage Restoration
- BGA & QFP Component Rework
- Cold Solder Joint Identification & Reflow
- Via Hole Repair & Barrel Restoration
- Solder Mask Restoration
- Conformal Coating Removal & Reapplication
- Dead Board Diagnosis & Fault Finding
- Connector & Header Pin Repair
- Flex PCB & Ribbon Cable Repair
- Full Board Restoration with Test Report
Equipment Used:
- Stereo microscope
- Hot air rework station
- Precision soldering iron (0.2mm tip)
- Conductive silver epoxy
- UV solder mask ink
- Copper foil tape
- 30AWG jumper wire
- Multimeter
- Oscilloscope
That board is not dead yet message me now and let's bring it back to life.
Other Electronics Engineering Services I Offer
FAQ
My car ECU has water damage can you repair it?
Yes. Water damage on automotive ECUs is one of the most common repairs I handle corrosion cleaning, trace rebuilding, pad restoration, and component replacement where needed.
The pad completely ripped off is that repairable?
Yes. A lifted or torn pad is rebuilt using copper foil anchored with epoxy, soldered, and covered with UV solder mask the component can then be re-soldered normally.
How do I send you my board?
For physical repairs, you ship the board to me. Message me first so I can assess the damage from photos before you send anything, and confirm the repair is feasible.
Can you repair boards with BGA chips?
Yes. BGA removal, reballing, and replacement is included in the Premium package using a hot air rework station with temperature profiling.
What if you can't fix it?
I will always tell you honestly after inspection if a board is beyond repair before starting work you will never be charged for a repair that cannot be completed.
