Browse categories
English
$
USD
Connect to your AI
I will design uav flight recorder, aircraft blackbox, telemetry logger and custom pcb
PCB design and Embedded system expert
I’m an Electronics Engineer specializing in PCB design, embedded systems, IoT development, and firmware engineering. I focus on turning ideas into reliable, production-ready hardware by handling every...
About this Gig
HELLO THERE!!
A reliable UAV black box must capture critical flight data continuously while surviving vibration, power interruptions, electrical noise, and demanding operating conditions. I develop compact avionics systems focused on dependable data acquisition and recovery.
You will get a professionally engineered UAV flight recorder and aircraft black box PCB for logging GPS, attitude, altitude, speed, battery, telemetry, and system parameters. I can tailor the hardware and firmware to your aircraft, sensors, storage capacity, and telemetry architecture.
What I will provide:
- UAV flight recorder architecture
- Aircraft black box PCB
- GPS/GNSS data logging
- IMU & attitude data recording
- Altitude & airspeed logging
- SD card/eMMC/Flash storage
- Real-time telemetry logging
- Timestamped flight records
- Battery & power monitoring
- UART, CAN, I2C & SPI interfaces
- Sensor integration
- Power protection & management
- Custom avionics PCB
- Firmware & data-logging software
- BOM, Gerbers & documentation
Why choose me:
- Avionics-focused engineering
- Reliable data acquisition
- Robust PCB architecture
Send your specifications today and let's build your custom UAV flight recorder.
FAQ
Can you design a complete UAV black box?
Yes. I can develop the PCB, storage system, sensors, firmware, data logging and telemetry interfaces.
What flight data can be recorded?
GPS position, altitude, speed, attitude, battery data, sensor measurements, telemetry and other parameters can be logged.
Can you use SD cards or Flash memory?
Yes. I can integrate SD card, eMMC, NOR/NAND Flash or another suitable storage solution.
Can the recorder receive telemetry data?
Yes. UART, CAN, SPI, I2C and other interfaces can be used depending on your system architecture.
Do you provide production files?
Yes. Deliverables can include schematic, PCB source files, BOM, Gerbers, firmware and manufacturing documentation.
