Browse categories
Explore
Fiverr Pro
English
$
USD
I will develop eurorack midi firmware teensy esp32 trs din usb audio interface embedded
Embedded Systems And PCB Design Engineer
I’m an Embedded Systems and PCB Design Engineer specializing in firmware development, custom electronic, MIDI and audio hardware and embedded product. I work with ESP32, STM32, Arduino, Teensy, Raspbe...
About this Gig
I specialize in embedded MIDI firmware for Eurorack, synthesizers and custom music hardware using Teensy, ESP32 and STM32. From TRS and DIN MIDI implementation to CV and Gate signal integration, OLED display firmware and full schematic updates, I deliver complete professional solutions that work reliably every time you perform live.
WHAT I OFFER:
- Eurorack MIDI module firmware development
- Teensy, ESP32 and STM32 embedded programming
- TRS MIDI Type A and Type B implementation
- DIN MIDI 5-pin integration
- USB MIDI alongside TRS and DIN simultaneously
- CV & Gate signal integration
- Synthesizer and sequencer firmware
- Custom MIDI controller firmware
- I2C & SPI peripheral integration
- OLED display firmware
- KiCad schematic update
- Wiring & connection guide
- Full documentation of all changes
- Testing protocol & verification guide
WHAT YOU RECEIVE:
- Complete firmware source files
- Compiled binary ready to flash
- Wiring & connection guide
- Full documentation
Why Choose Me:
- Real Eurorack & music hardware firmware experience
- TRS Type A & Type B both supported correct for your device
- CV & Gate integration alongside MIDI in one delivery
Message me now and let's bring your Eurorack module to life today
Other Electronics Engineering Services I Offer
FAQ
Do you work with Eurorack voltage levels (5V and 3.3V)?
Yes. I am experienced with Eurorack power standards and design firmware that works safely within Eurorack voltage specifications.
Can you add CV and Gate support to my module?
Yes. CV and Gate integration can be added to your firmware and hardware design as part of the project.
Do you support both TRS Type A and Type B MIDI?
Yes. I can implement either TRS Type A or Type B depending on what your target device requires.
Can you work with an existing PCB design?
Yes. Send me your existing schematic and firmware and I will update both to add the features you need.
