I will analyze, filter and calibrate your sensor data with python
Data applications
About this Gig
Noisy sensor logs full of spikes, dropouts or drift? Or a sensor that reads a little off? Send the raw export and your reference readings. I'll clean it, calibrate it and show you every step.
I work with:
Load cells, strain gauges, pressure transducers, thermocouples, accelerometers and flow meters
Arduino (HX711), Raspberry Pi, NI/LabVIEW and other logger exports (CSV, TXT, XLSX)
Spike and dropout removal, resampling, low-pass filtering, zero-drift correction
Calibration curves with residuals, nonlinearity, hysteresis and 95% uncertainty
You get: the cleaned data, before/after plots, the calibration equation and a Python script that reruns everything on your next file.
About me: aerospace engineering student at the University of Florida (B.S. December 2026), with hands-on load-frame and wind-tunnel lab testing. I use AI-assisted coding and check every result on your data before delivery.
Scope: test, prototype, research and hobby data only. Not offered: accredited (ISO 17025) calibration certificates, safety sign-offs, graded homework or exams, weapons work.
Platform:
Arduino
Sensors:
Temperature
•
Accelerometer
•
Pressure
•
Other
Expertise:
Testing
•
Programming
•
Signal processing
FAQ
Can you calibrate without reference readings?
I can clean, filter and convert with the datasheet sensitivity, but a real calibration needs known reference points. I’ll tell you which you’re getting.
Is this an accredited calibration certificate?
No. It’s an engineering-quality calibration for test and prototype work, with the uncertainty stated, not an ISO 17025 certificate.
Can you do my homework or lab report?
No. Graded coursework is outside this gig.
Do you write the Arduino or logger code?
No. I work on the data your setup already records. If your logger isn’t saving data yet, message me first.

