I will design custom lithium battery bms schematics, cell balancing, and pcb layouts
Power Electronics Engineer, Lithium BMS, Solar MPPT, Motor Control and Simulink
About this Gig
Looking for a reliable, safe, and custom Battery Management System (BMS) for your lithium-ion or LiFePO4 battery pack? I design custom BMS hardware, protection circuits, and production-ready PCB layouts tailored to your exact cell configuration, voltage, and continuous/peak current ratings.
What I Can Design for You:
- Cell Configuration: Single-cell (1S) up to multi-cell packs (e.g., 4S, 14S, 20S+).
- AFE & Protection: OVP, UVP, OCP, SCP, and NTC thermal protection using TI BQ or Analog Devices ICs.
- Cell Balancing: Passive resistive or active charge-transfer balancing circuits.
- High-Current PCB Layout: Trace width sizing, thermal vias, MOSFET cooling, and low-EMI routing in KiCad, Altium Designer, or EasyEDA.
- Interfaces: CAN bus, I2C, SPI, UART, USB, BLE, and Wi-Fi telemetry integration.
Deliverables (Depending on Package):
- Clean, well-documented Schematic & Native Source Files
- Complete Bill of Materials (BOM) with active, in-stock distributor part numbers
- Manufacturing-ready Gerber files, Pick-and-Place, and 3D STEP model.
Please message me with your battery pack specifications before placing an order so we can confirm the project scope and select the right package!
File format:
Gerber
•
STEP
•
SCH
•
•
Pcbdoc
Software:
Altium Designer
•
Eagle CAD
•
EasyEDA
•
KiCad
•
LTspice
•
Tina Ti
Interface:
UART
•
USB
•
I2C
•
Wi-Fi
•
BLE
•
BT
•
Controller Area Network (CAN)
FAQ
What battery pack specifications do you need from me to get started?
Please share your cell chemistry (Li-ion, LiFePO4, or LTO), series/parallel configuration (such as 1S, 4S, 13S, or 20S+), continuous and peak discharge currents, charging current, and any required communication interfaces like CAN bus, UART, I2C, SPI, or BLE.
Which PCB design software and file formats will I receive?
I design custom BMS schematics and PCB layouts in KiCad, Altium Designer, or EasyEDA based on your preference. Depending on your selected package, you will receive editable native source files (SCH, Pcbdoc), a full Bill of Materials (BOM), manufacturing Gerber files, and a 3D STEP model.
Are the PCB files ready for turnkey manufacturing at JLCPCB or PCBWay?
Yes. All Standard and Premium deliverables include complete fabrication and assembly packages—Gerber files, drill files, Pick-and-Place (CPL), and an optimized BOM using active, in-stock components from LCSC, DigiKey, or Mouser so you can order assembled boards immediately.
Which BMS protection ICs and balancing methods do you support?
I work with industry-standard Analog Front-End (AFE) & protection controllers from Texas Instruments (BQ series), Analog Devices (LTC/ADBMS), & NXP. I can implement both passive resistive cell balancing &high-efficiency cell balancing along with OVP, UVP, OCP, short-circuit, & NTC thermal protection
Can you integrate a microcontroller or wireless telemetry into the BMS PCB?
Yes. Beyond standalone hardware BMS boards, I can integrate host microcontrollers (STM32, ESP32) with CAN bus, RS485, UART, USB, Bluetooth Low Energy (BLE), or Wi-Fi interfaces for State of Charge (SOC) monitoring, mobile app connectivity, and external charger communication.

