I will fix timing failures and write xdc constraints for your artix 7 fpga in vivado
Artix 7 FPGA Engineer
About this Gig
Welcome to my Gig
Is your Artix-7 design failing timing, or do you need clean constraints before your board works? I analyze the Vivado reports, find the cause, and fix it.
WHAT YOU GET - XDC constraints for pins, I/O standards and clocks - Analysis of your timing and clock reports (Standard and Premium) - Written report of root causes with recommended fixes - Fixes applied to your design, with before and after reports (Premium)
TYPICAL PROBLEMS I SOLVE - Negative slack on critical paths - Missing or wrong clock constraints - Clock domain crossing issues - Wrong pin assignments or I/O voltage standards
HOW I WORK You share your Vivado project or source files and the target clock. I review the reports, confirm what is achievable, and deliver the results. Premium continues until the agreed target is met, if the design allows it.
NOT A FIT: academic assignments, PCIe or DMA projects, or designs on other FPGA families.
FAQ
Can you guarantee my design will meet timing?
I guarantee a full analysis and every fix within the package scope. If the target clock is not reachable without redesigning the architecture, I will tell you why and what it would take.
Do you need access to my full design?
I need enough to reproduce the Vivado build. If your code is confidential, I can work under an NDA or on a reduced version that shows the problem.
Do you work on other FPGA families?
My focus is Artix-7 in Vivado. Message me before ordering for other families.
What if the problem is in my PCB or schematic?
I will point out clear signs of a hardware cause, such as wrong pin voltages or missing clocks, but I do not redesign boards in this gig.

