Browse categories
Explore
Fiverr Pro
English
$
USD
I will design raspberry pi, arduino enclosure 3d print stl injection molding solidworks
Mary
About this gig
Struggling to turn your 3D printed prototype into a production-ready part?
I design custom Raspberry Pi & Arduino PCB enclosures optimized for 3D printing, injection molding and mass production manufacturing.
MY SERVICES:
- Custom PCB enclosure CAD design
- 3D print-ready STL file export
- Injection molding DFM analysis
- Draft angle & wall thickness fix
- Snap-fit, screw boss & rib design
- USB, GPIO & vent port cutouts
- Prototype to production conversion
- Waterproof IP65 seal integration
- STEP, IGES & STL file delivery
- Tolerance & fit optimization
PERFECT FOR:
- Raspberry Pi 4/5 case
- Arduino Uno Mega Nano
- ESP32 IoT sensor box
- HAT shield stacking
- Camera module housing
- Relay board enclosure
- Motor driver case
- GPS tracker housing
- Weather station box
- Smart home hub case
- LED controller box
- PSU power enclosure
- Data logger housing
- Robot controller box
- Drone flight control
️ TOOLS:
- SolidWorks
- Fusion 360
- KeyShot
Message me your PCB dimensions and quantity let's get your enclosure manufactured and production ready today.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Mary
Mary
industrial and product designer
- FromItaly
- Member sinceOct 2026
- Avg. response time1 hour
Languages
English, Italian, Spanish, German, French
Hello i'm Mary a mechanical design engineer with 6+ years turning concepts into production-ready products. I specialize in plastic injection molding, sheet metal fabrication and photorealistic 3D rendering for Amazon FBA brands and hardware startups. From IoT enclosures to Raspberry Pi housings, I deliver DFM-optimized designs manufacturers trust. Fluent in SolidWorks, KeyShot & Fusion 360. Whether you need one prototype or 10,000 units message me and let's build something remarkable together.
Other Industrial & Product Design Services I Offer
FAQ
I only have a rough 3D model or sketch is that enough to start?
Absolutely! I work with rough STL files, hand sketches, napkin drawings, or even reference photos. I will build a clean, parametric SolidWorks model from scratch and optimize it for your manufacturing method. Just share whatever you have and I will handle the rest.
Can you make my 3D printed enclosure ready for injection molding?
Yes — this is my specialty. I will add proper draft angles (1-3°), uniform wall thickness (1.5-3mm), ribs, bosses, radii, and remove undercuts. You will receive production-ready files your mold maker can use directly without additional engineering.
What PCB boards and components do you support?
I design enclosures for Raspberry Pi 3/4/5, Arduino Uno/Mega/Nano/ESP32, BeagleBone, Jetson Nano, custom PCBs, HATs, shields, relay modules, and sensor boards. Just send me your PCB dimensions (DXF or measurements) and component heights.
Do you provide files my manufacturer or mold maker can use directly?
Yes. The Premium package includes STEP, IGES, STL, native SolidWorks files, and 2D PDF technical drawings with tolerances, material specs, and surface finish notes. Your manufacturer can open these files and begin tooling immediately with zero extra work.
How many revisions are included if I need changes?
: Basic includes 2 revisions, Standard includes 4, and Premium includes unlimited revisions until you are 100% satisfied. Most clients finalize within 2-3 rounds. I also offer a quick video call to align on requirements before starting to minimize revisions.
Can you design waterproof or IP-rated enclosures?
Yes. I design IP54, IP65, IP67, and IP68 rated enclosures with proper gasket grooves, O-ring channels, ultrasonic weld lines, and sealed cable glands. Just specify your target IP rating and operating environment (outdoor, marine, industrial) and I will engineer accordingly.
