I will review your pcb design and make it ready for production

A board that fails after assembly costs you weeks. A review costs two days.

I check your design before you spend money on manufacturing. I know these mistakes from my own 50-unit batch: a clearance error between a via and a trace stopped the Ethernet controller from starting, and every board needed rework.

What I check:

• Schematic: power supply, decoupling, pull-ups, reset and boot pins, protection, missing parts
• Layout: clearances, DRC errors, ground and power routing, crystal and antenna placement, heat
• Footprints and pin 1 orientation against the datasheets
• Manufacturability: part availability, LCSC stock, assembly rules
• Files: Gerber, drill, BOM and pick-and-place ready for JLCPCB

You get a written report with screenshots, sorted into critical, important and optional. In the Premium package I correct the files for you.

Send your KiCad project, or an Eagle, EasyEDA or Altium export, or Gerber plus PDF schematic. Message me first so I can confirm board size and effort.