I will design fixed wing vtol uav airframe cad cfd propulsion sizing px4 ardupilot


About this gig
Do you need a fixed-wing VTOL UAV designed for a real mission, not just a 3D concept?
I develop airframe CAD and engineering studies connecting layout, payload, propulsion and flight control.
I can provide:
- Fixed-wing VTOL, lift-plus-cruise and quadplane layouts
- Wings, fuselage, tail, lift motors and pusher CAD
- Payload, battery, ESC, avionics and landing-gear integration
- Mass budget, CG estimate, thrust, motor, propeller and battery sizing
- Aerodynamic assessment and scoped CFD analysis
- Manufacturing CAD, STEP/native files, drawings and BOM
- PX4 or ArduPilot integration planning and setup support
I assess MTOW, payload, range, endurance, speed, components and manufacturing constraints before design.
CFD conditions are agreed before simulation. Flight-controller work depends on your Pixhawk, firmware, motor/servo layout and hardware.
You receive organized CAD files and calculations matched to your package. Estimates are separated from validated flight performance; flight testing and certification are not included unless agreed separately.
Send your mission profile, VTOL configuration and component details before ordering; I will confirm scope before starting work.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Mike
UAV and Drone CAD Designer, Fixed Wing VTOL, FPV and Reverse Engineering
- FromUnited States
- Member sinceNov 2026
- Avg. response time1 hour
Languages
English, German, Arabic
FAQ
Which fixed-wing VTOL configurations can you design?
I can work on lift-plus-cruise and quadplane configurations, including fixed wings, fuselage, tail assembly, vertical lift motors and forward propulsion. Tiltrotor and tiltwing concepts can also be assessed, but their transition mechanisms and control requirements need a separate project scope.
How do you calculate the propulsion requirements for a hybrid VTOL UAV?
I consider the vertical-lift and forward-flight requirements separately. This includes estimated aircraft mass, payload, thrust-to-weight ratio, motor performance, propeller characteristics, battery voltage and current requirements. For lift-plus-cruise configurations, the vertical motors and cruis
What information do you need to size the motors, propellers and battery?
The most useful inputs are target MTOW, payload, desired endurance, cruise speed, wingspan, operating altitude, motor specifications, propeller data and battery chemistry or capacity preferences. Where these are unknown, I can establish preliminary selections based on the agreed mission assumptions.
What is included in your CFD analysis?
The Premium package includes one agreed aerodynamic simulation case for the selected aircraft geometry and operating condition. The report can include mesh information, boundary conditions, pressure distribution, velocity contours and aerodynamic results. Additional flight conditions, powered-propel
Do I need to provide an existing CAD model for CFD?
Not necessarily. The airframe can first be developed in CAD and then prepared for the agreed analysis. If you already have a model, STEP, IGES or Parasolid files are useful. The geometry must be suitable for the selected CFD workflow; major cleanup may require additional work.
Can you configure both PX4 and ArduPilot?
The project can be scoped around either PX4 or ArduPilot. Initial configuration support may include firmware selection, aircraft type, motor and servo mapping, sensor requirements, flight-mode planning and failsafe configuration. Please provide your Pixhawk or other supported flight-controller model
. Can the airframe be designed for carbon-fiber or 3D-printed construction?
Yes. CAD can be developed around carbon-fiber tubes, composite structures, 3D-printed components or other agreed materials. Manufacturing considerations such as part segmentation, joining interfaces, wall thickness and assembly access can be included in the selected package.
Can you improve an existing VTOL aircraft design?
Yes. You can provide existing CAD models, sketches, component lists, performance data or photographs. I can review the current configuration and scope modifications to the airframe, propulsion layout, payload integration or aerodynamic design.
