Browse categories
Explore
Fiverr Pro
English
$
USD
I will design a 3d printable enclosure or part in fusion 360
Andres Moreno
About this gig
Need a case for your electronics, a bracket, a replacement part or a custom mount? I'll design it in Fusion 360 for 3D printing in PLA (tell me if you need another material), with real clearances for screws, heat-set inserts and the parts that go inside.
I design parts for printing all the time: robot legs and servo mounts, an exhaust-controller enclosure for my car, RC car chassis and steering parts, a game-console case and number-plate holders. I print and test-fit them on my own printer, so the tolerances are tested, not guessed.
You get STL files ready to print, plus the Fusion 360 file or a STEP file.
Send me measurements, photos or a sketch and I'll confirm the price before you order.
Not for: load-bearing safety parts, or parts that must be certified.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Andres Moreno
Andres Moreno
ESP32 Firmware, KiCad PCB Design and Fusion 360 CAD
- FromAustralia
- Member sinceOct 2026
Languages
English, Spanish
Hi, I'm Andres, an Electrical & Electronic Engineering student at UWA in Perth. Outside uni I build my own electronics: ESP32 firmware, PCBs in KiCad and 3D-printed cases in Fusion 360. My favourite build is a handheld game console on a 4-layer ESP32-S3 board I designed. JLCPCB made the PCB; I soldered it and tracked down the power faults myself. I've also made ESP-NOW RC cars, a wireless robotic arm and a two-legged robot that talks. If your ESP32 or Arduino project isn't working, message me and I'll tell you honestly if I can fix it. English and Spanish.
My Portfolio
FAQ
Can you copy a broken or missing part?
Usually, yes. Send clear photos next to a ruler and the key measurements (calipers if you have them). I rebuilt a broken bin pedal this way, without a 3D scanner, and it fits the original bin.
Do you print and post the part?
Right now I deliver the files only. You can print them yourself or with any local print service, and I include the settings I recommend.
What print settings should I use?
Every design comes with recommended settings: material, layer height, walls, infill, supports and print orientation.
