Browse categories
Explore
Fiverr Pro
English
$
USD
I will design a custom pcb enclosure or electronics housing for 3d printing
Patrick K.
About this gig
I design custom PCB enclosures and electronics housings for 3D printing. I work with custom PCBs, Arduino, ESP32, Raspberry Pi, IoT devices, displays, sensors, switches and panel connectors, with attention to component fit, mounting, clearance and assembly.
I can design around custom PCBs, Arduino, ESP32, Raspberry Pi, displays, sensors, switches and panel connectors.
Typical enclosure features include:
- PCB standoffs and mounting bosses
- Display, button and connector cutouts
- Cable access openings
- Screw closures, heat-set inserts and magnets
- Internal component and connector clearances
- Rounded corners, fillets and chamfers
- STL and STEP files
- PLA printing and hardware installation where included
My current in-house physical printing service is limited to approximately 90 × 90 × 90 mm.
Standard package scope is intended for simple rectangular or near-rectangular enclosures and typically includes one display opening plus up to two cable/connector openings. More complex geometry, additional cutouts, large vent patterns or unusual mechanisms may require a custom offer.
Please message me before ordering if you are unsure which package fits your project.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Patrick K.
Patrick K.
Electronics Enclosure and Prototype Designer
- FromEstonia
- Member sinceNov 2017
Languages
English
I design and build practical custom enclosures for electronics projects and prototypes. My work combines electronics experience, parametric CAD and 3D printing, with attention to PCB mounting, displays, connectors, component clearances, threaded inserts, magnets and assembly. I work particularly well with Arduino, ESP32, Raspberry Pi, sensors, displays, IoT devices and custom PCBs. I can provide CAD/STL files or manufacture compact PLA prototypes.
My Portfolio
FAQ
What information do you need to design my enclosure?
Please provide the exact models of the PCB, display, connectors, switches and other components, together with STEP files or dimensioned drawings where available. For custom PCBs, I need the board dimensions, thickness, mounting-hole locations and connector positions.
Do you guarantee that my components will fit?
I design to the geometry and dimensions provided. Manufacturer CAD or dimensioned drawings are preferred. Dimensions measured or supplied by the buyer remain the buyer’s responsibility unless physical fit verification has been specifically arranged.
What is included in a standard enclosure design?
Standard scope covers a simple rectangular or near-rectangular enclosure with rounded corners, fillets or chamfers, normal PCB mounting features, one display opening and up to two simple cable or connector openings. More complex designs may require a custom offer.
What counts as a simple cutout?
A normal rectangular, circular or similar opening for a display, button, cable or connector. Complex profiles, large ventilation patterns, multiple repeated openings or unusual mounting geometry may require additional work.
Can you make enclosures larger than 90 × 90 × 90 mm?
CAD-only designs may be larger where practical. My current in-house physical printing service is limited to approximately 90 × 90 × 90 mm.
What files will I receive?
STL and STEP files are included where specified in the package. The native editable FreeCAD .FCStd project can be supplied as an additional source-file option.
Can you install threaded inserts, magnets or other hardware?
Yes. Heat-set inserts, magnets, screws and other simple enclosure hardware can be installed where included in the selected package or custom offer.
What types of projects do you not accept?
This service is intended for ordinary low-voltage electronics and prototypes. I do not provide certified waterproof/IP-rated enclosures, mains-voltage safety certification, medical or other safety-critical designs, or battery/fire-containment certification.
