Browse categories
Explore
Fiverr Pro
English
$
USD
I will build messer omniwin nesting programs from your dxf files
Sivanildo F
About this gig
Stop losing material to bad nesting. I build production-ready .NC and .PGR programs in OmniWin specifically for Messer plasma and oxyfuel controllers.
No generic CAM. No hand-edited G-code guesswork. Only verified code that loads directly and cuts correctly the first time.
Built for Messer machines. Thick-plate experience up to 100mm. Every layout maximizes yield and minimizes torch travel.
What you receive:
- OmniWin nesting for your exact sheet and material grade
- Clean .NC/.PGR with verified lead-in/out geometry
- Kerf, feed rate, and pierce routine matched to your thickness
- Cut sequence to reduce heat distortion, dross, and torch wear
- Production-organized, numbered, batch-ready files
Packages: Basic $15 (1 part) | Standard $40 (3 parts) | Premium $80 (7 parts, batch-ready)
Scope: Clean DXF files only. No CAD modeling or PDF conversion. Minor geometry repair included in Standard/Premium. Complex reconstruction quoted separately.
Send your DXF drawings and material specs. Get cutting programs your Messer controller understands without modification.
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Sivanildo F
Sivanildo F
Messer OmniWin Nesting Specialist, DXF to NC,PGR Programmer
- FromBrazil
- Member sinceMay 2026
- Avg. response time1 hour
- Last delivery1 month
Languages
English, Portuguese
Your DXF files become optimized Messer NC and PGR programs, built in OmniWin, ready to load.
I program exclusively for plasma and oxy fuel shops that cannot afford scrap or downtime. Every layout is calculated for maximum yield.
You receive production ready PGR and NC files for Messer controllers, high yield nesting with minimal scrap, correct lead geometry, technology parameters, cut sequence, thick plate up to 100mm, and fast turnaround.
No generic CAD modeling. No hand edited G code guesswork. Only shop floor ready Messer output.
Send your drawings. Get code your machine understands.
Other Industrial & Product Design Services I Offer
FAQ
Do you design parts from sketches, PDFs, or descriptions?
I do not engineer parts from scratch. I accept clean DWG 1:1 files or dimensioned sketches/PDFs with exact measurements for simple 2D parts. No photos or vague descriptions. Message me first if unsure.
What machine and software do you program for?
I program exclusively for Messer CNC plasma/oxy-fuel machines using OmniWin. I deliver .NC and .PGR files. I do not work with generic plasma tables or fiber lasers. Message me before ordering if your equipment differs.
What file format do you need from me?
Send clean DXF or DWG with closed 2D polylines. Include part names, quantities, and material. Broken geometry or missing dimensions will delay delivery.
What information do you need to start nesting?
Material type and thickness, sheet dimensions, grain direction, part quantities, clamp zones, micro-joints, output format (.NC/.PGR), and remnant strategy. Send all details upfront to avoid delays.
How do you optimize sheet yield?
I use OmniWin algorithms to maximize sheet yield and minimize scrap. Common-line cutting, strategic rotation, and remnant nesting are applied based on your production goals.
What is included in the final delivery?
You receive nesting programs (.NC/.PGR), layout reports, optimized lead-in/out, correct cutting technology, and organized files ready for direct loading into your Messer machine.
How many parts or sheets can you nest per order?
Standard orders cover up to 10-15 parts across 1-7 sheets. For high-volume runs (50+ parts, 10+ sheets), message me first for a custom quote and delivery schedule.
Do you offer lead-in / lead-out optimization and clamp zone management?
Yes. I configure lead-in, lead-out, and micro-joints using your Messer cutting technology. Clamp zones and collision boundaries are respected for ready-to-run programs.
