I will design your medical device enclosure


About this gig
Is your device enclosure looking perfect on screen but failing at the factory?
Walls too thick, no draft angles, undercuts that push up tooling cost, and a PCB that doesnt fit. These mistakes cause expensive mold redesigns and delayed launches.
I fix that before you pay for tooling. I design medical device enclosures and electronic housings for injection molding and 3D printing, built for manufacturing from day one.
If you need a CAD enclosure design for a glucose meter, pulse oximeter, handheld diagnostic tester or wearable health device, you are in the right place. In every project I check wall thickness, draft angles, undercuts, snap-fits, screw bosses, PCB fit, tolerances and ease of cleaning.
I work in Fusion 360, SolidWorks and Inventor. You receive a manufacturing-ready 3D CAD model in STEP and STL format, ready for your prototype, 3D printing or injection molding supplier. Send me your PCB dimensions, sketch or idea and I will reply quickly with a plan. Note: I provide design and CAD only. FDA and CE regulatory approval is separate. Message me before ordering
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Slyvan
Product designer
- FromPoland
- Member sinceNov 2026
Languages
English
FAQ
What do I need to send you to get started?
Send your PCB dimensions (a DXF, STEP or datasheet is best), or a sketch if you don’t have a board yet. Tell me the device type, how it will be held or worn, and whether you plan to 3D print or injection mold it. If you are unsure, message me and I will guide you.
Will my design be ready for injection molding, and do you handle FDA or CE approval?
Yes, I design for manufacturing: wall thickness, draft angles, undercuts, snap-fits and PCB fit are checked to avoid costly mold changes. I provide design and CAD only. FDA/CE regulatory approval and clinical validation are separate and not included.
